Offers
Senior discounts (65+)Veteran discountsFirst responder discountsAsk when you call
Skip to content
Chicago suburbs · free on-site estimate

Footings & Piers

Spread footings, drilled and belled piers, and grade beams sized to the load and poured below the 42-inch frost line.

Formed concrete foundation wall and footing by All Concrete Pros

40+

years in business

Footings and piers are the part of a project nobody sees and the part that decides whether everything above stays where it was built. A footing spreads a concentrated load over enough soil area to carry it; a pier does the same with a deep shaft reaching past unstable surface material.

Depth is not negotiable here. The design frost depth across the Chicago suburbs is 42 inches, and any footing above it will be lifted every winter and dropped every spring. That cycle tips deck posts, cracks garage slabs and separates additions from the house.

What's included

  • Layout from approved drawings, JULIE locate
  • Excavation or auger drilling to depth
  • Forming with tubes, forms or belled bottoms
  • Rebar cages, dowels and anchor bolts
  • Village footing inspection before the pour
  • Pour, strip and backfill in compacted lifts

How the job goes

  1. Review drawings, confirm the footing schedule
  2. Permit, JULIE locate, stake the layout
  3. Excavate or drill, set steel, inspect
  4. Pour, cure, strip forms, backfill

Related work

We haven't photographed a footings & piers job yet. These are from our new installation and commercial floors work.

Step forms: New concrete by All Concrete Pros2 photos

Excavation and forms for steps

Chicago suburbs

Interior slab: New concrete by All Concrete Pros

Interior slab

Chicago suburbs

Dock apron cut out and re-poured at a warehouse door2 photos

Loading dock apron replacement

Chicago suburbs

Footings & Piers questions

How deep do footings need to be in Illinois?

The frost depth used across the Chicago suburbs is 42 inches, and most village codes require the bottom of the footing at or below it.

How much does a concrete pier cost?

Piers are priced each, and the diameter and depth decide it. A 12-inch deck pier is the simplest, while a large drilled and belled pier carrying an addition costs considerably more.

What is a belled pier?

A drilled pier with a flared base. The bell increases bearing area at the bottom without widening the whole shaft, which is how you carry a heavy column load on stiff clay.

Do footings need an inspection before the pour?

Yes, in every village we work in. The inspector checks depth, width, soil bearing and reinforcing steel. We schedule it and meet the inspector on site.

Summarize this page with AI

Opens your assistant with the question ready. Answers come from the assistant, not from us.

Footings & Piers near you

Related: New Concrete Installation · Commercial Concrete Floors · Concrete Retaining Walls · Bollard Posts. Updated 2026-09-06.

Free estimate

Free footings & piers estimate

Same-day callback on weekdays. On-site measurement, written price, permit filed.

(630) 485-9732
Request a written quoteMon–Sat 8–5 · Hanover Park, IL
Call nowFree estimate